Looking to remove the shroud and replace with 2 120mm fans, trying to figure out if there is an un-used fan header (#2) or if #1 is the only one. The other 3 are LED (90% sure from an old GN teardown)
#1 is the standard connector for the stock 3-fan daisy chain from the GN tear-down, but I haven't been able to find any info on if #2 is fan or LED.
Going to be using the EK 4-pin fan-->GPU adaptor (2x if both are fan) or daisy chain the fans and connect both to #1 if not.
Possibly harder question... IF they're both fan, would both control the s