as the title says, i need to know the best possible way, i'm doing a full loop disassembly and block cleaning tommorow evening, i have a fillport and holesaws here with a drill.
the thing i need to know is the best way to mark where the reservoir port is on the panel, and if it will really be worth it to drill out the rivets and diassemble my NZXT H210i to drill it from the underside of the panel?
Things i have to do the job:
Bi-metal holesaw kit ranging from 1 inch (most likely size) to 2 inch.
A Drill, Obviously.
Painters tape so i dont scratch the white paint off the panel when drilling.
the physical white bitspower fillport itself.
Things i may need to purchase that i can think of :
Hand rivet gun and rivets.
A set of small metal files.
Things i dont know about this case :
Rivet size for replacement rivets.
Any help from anyone in the community who is farmiliar with this task would be appreciated, this is my first time doing this in all the years ive watercooled. Normally, my filling proceedure Consists of Removing a plug and shoving a tube with a fitting on the end on and filling with a funnel, but i dont have enough clearance for that, and my current solution backflows if i dont plug it quickly enough.