Jump to content

Welcome to ExtremeHW

Welcome to ExtremeHW, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be a part of ExtremeHW by signing in or creating an account.

  • Start new topics and reply to others
  • Subscribe to topics and forums to get email updates
  • Get your own profile page and make new friends
  • Send personal messages to other members.
  • Take advantage of site exclusive features.
IGNORED

Nvidia Quadro K4000 renewed for ETF.


Avacado
 Share

Recommended Posts

EHW Content Creator

This card was about as dirty as I would expect for an 8 year old card. I am sure it wasn't helping the cooling. I have never seen so much thermal paste stock from the factory before, I honestly thought it was clay at first glance. Either way, she got updated to 2021 cooling standards with TR 0.5mm 11W/mk pads and TG Kryonaught. Gave the fin stacks a good once over with the datavac which opened some of the occluded channels. Finally threw in a FaH touch at the end, not bad for a paper print out. It's all for the cause. 

 

20210716_100319.thumb.jpg.d8ba35d40045aba946ac57465f0825dd.jpg

 

20210716_100330.thumb.jpg.111ae437e00ed7c33305e982da24bce9.jpg

 

Gif for next pic.

 

Clint.gif.929bd036847e7ce9757b163023913e4a.gif

 

20210716_100336.thumb.jpg.b37ac4b0b8b55b42c1b3c00e09b035f4.jpg

 

20210716_100919.thumb.jpg.ca8eb6b3f8e36b0efbc02ce9c11f80b5.jpg

 

I thought I would finally get to use that 17W/mk Fujipoly sample they sent me, but alas, 1.0mm was too think and brittle. Oh well was worth a shot.

 

20210716_103122.thumb.jpg.6783c59a4edcbd0241dff54b7ac1f6b8.jpg

 

Clean, exposing the Samsung GDDR5 modules.

 

20210716_105746.thumb.jpg.2b168b7a2f0890d75b90606eb61144df.jpg

 

Fresh new look.

 

20210716_112630.thumb.jpg.60f2aff4c4610bc287a18594b82643e6.jpg

 

And finally, a nod to my homie @BWG on the final touch.

 

20210716_122329.thumb.jpg.f392ace904ace1ebba62d718525633e2.jpg

  • Thanks 4
Link to comment
Share on other sites

13 hours ago, Avacado said:

This card was about as dirty as I would expect for an 8 year old card. I am sure it wasn't helping the cooling. I have never seen so much thermal paste stock from the factory before, I honestly thought it was clay at first glance. Either way, she got updated to 2021 cooling standards with TR 0.5mm 11W/mk pads and TG Kryonaught. Gave the fin stacks a good once over with the datavac which opened some of the occluded channels. Finally threw in a FaH touch at the end, not bad for a paper print out. It's all for the cause. 

 

20210716_100319.thumb.jpg.d8ba35d40045aba946ac57465f0825dd.jpg

 

20210716_100330.thumb.jpg.111ae437e00ed7c33305e982da24bce9.jpg

 

Gif for next pic.

 

Clint.gif.929bd036847e7ce9757b163023913e4a.gif

 

20210716_100336.thumb.jpg.b37ac4b0b8b55b42c1b3c00e09b035f4.jpg

 

20210716_100919.thumb.jpg.ca8eb6b3f8e36b0efbc02ce9c11f80b5.jpg

 

I thought I would finally get to use that 17W/mk Fujipoly sample they sent me, but alas, 1.0mm was too think and brittle. Oh well was worth a shot.

 

20210716_103122.thumb.jpg.6783c59a4edcbd0241dff54b7ac1f6b8.jpg

 

Clean, exposing the Samsung GDDR5 modules.

 

20210716_105746.thumb.jpg.2b168b7a2f0890d75b90606eb61144df.jpg

 

Fresh new look.

 

20210716_112630.thumb.jpg.60f2aff4c4610bc287a18594b82643e6.jpg

 

And finally, a nod to my homie @BWG on the final touch.

 

20210716_122329.thumb.jpg.f392ace904ace1ebba62d718525633e2.jpg

What sort of PPD are you expecting ? 

Link to comment
Share on other sites

EHW Content Creator
3 hours ago, ENTERPRISE said:

What sort of PPD are you expecting ? 

I have no idea BWG mentioned the multipliers in another thread for both. I am going to be using a 240 aio on a GT710 today to see which is better. I am looking for the best OCer , hoping to compete with the 960's. As far as straight points go, nothing compares to the Teslas vs price point. Though they have been giving me so many problems as of late and the price of newer cards keep coming down. 

Link to comment
Share on other sites

9 hours ago, Avacado said:

I have no idea BWG mentioned the multipliers in another thread for both. I am going to be using a 240 aio on a GT710 today to see which is better. I am looking for the best OCer , hoping to compete with the 960's. As far as straight points go, nothing compares to the Teslas vs price point. Though they have been giving me so many problems as of late and the price of newer cards keep coming down. 

Well it looks like we will just have to wait and see!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...

Important Information

This Website may place and access certain Cookies on your computer. ExtremeHW uses Cookies to improve your experience of using the Website and to improve our range of products and services. ExtremeHW has carefully chosen these Cookies and has taken steps to ensure that your privacy is protected and respected at all times. All Cookies used by this Website are used in accordance with current UK and EU Cookie Law. For more information please see our Privacy Policy