Jump to content
*Coming Soon* Signature Rigs & Content Embed Wizard (Google Docs,Soundcloud,Spotify & More) ×

Welcome to ExtremeHW

Welcome to ExtremeHW, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be apart of ExtremeHW by signing in or creating an account.

  • Start new topics and reply to others
  • Subscribe to topics and forums to get email updates
  • Get your own profile page and make new friends
  • Send personal messages to other members.
  • Take advantage of site exclusive features.

Elmor Labs AMPLE - First Look


Recommended Posts

Elmor recently started taking orders for the AMPLE 20A power card. It’s a simple little single-phase VRM that can be used to replace a broken VRM or simply overcome that pesky OCP/OVP. The most common potential usage would be for a GPU memory rail. However, with an output voltage from 1.0-3.4 V it could be used for many different applications.

 

 

I obtained a test sample of this new device and I intend to put it to the ultimate test. I have an RX 580 GPU with a damaged memory voltage rail, but otherwise the GPU is in perfect condition. The plan is to solder on the AMPLE power card and observe the impact on the memory overclocking. I know what the card was capable of before the memory VRM died, so it’s the perfect test case for this little device. So follow along as I put this thing to the test and find out if it’s capable of delivering sufficient power to 8 GB of GDDR5.

 

 

The AMPLE Device

The device ships in an anti-static bag with the 6-pin connector added in as an accessory. This gives you the flexibility to power up the AMPLE from any qualifying voltage source you desire.

 

 

 

Product Specification

  • Output voltage adjustable 1.0-3.4 V using the on-board potentiometer (range can be increased by adding your own potentiometer)
  • Nominal input voltage 12 V (functional from 4.5 V up to 16 V)
  • Max output current 20 A (thermally limited). Active cooling may be required to achieve high output current.
  • Efficiency at max output 91.5% (3.4 V, 20 A, 750 KHz)
  • Switching frequency selectable between 300 KHz and 750 KHz
  • OVP (+20%), OCP (24A) and OTP (Tj = 150*C)
  • Output voltage can be monitored and adjusted using the EVC2 VMOD1-header
  • Ships with a PCIE 6-pin power connector which can be soldered on by the user
  • Switch 1 OFF = 750 KHz switching frequency
  • Switch 1 ON = 300 KHz switching frequency
  • Switch 2 OFF = PSM = Power Saving Mode, higher ripple but lower loss at low loads
  • Switch 2 ON = CCM = Constant Conduction Mode. The PMIC is always regulating to the best of its ability, for the tightest possible voltage regulation. In some cases, for example with this project at 3.0V+, that will create a high loss in no-load or low-load situations.

Source Credit: elmorlabs.com

 

There is one switch on the device which acts as a mode selector. There are a total of 4 different combinations you can set, which change the output delivery settings.

For controlling the voltage there are multiple different methods you can choose from. To make things simple, there is a potentiometer on the power card for direct control. For more advanced control, you have the ability to integrate the device with an EVC2 module using the vmod connection.

 

 

Mounting the Power Card

Before you just hastily solder on the AMPLE device, you should take the time to power it on and make sure it works. I would suggest powering it up and setting the desired voltage before you attempt to solder it on a GPU.

 

 

The underside of the AMPLE has power and ground planes. In my particular case I won't need these connections so I decided to insulate them with a few layers of Kapton tape. This is an unnecessary step, but in my case there were a few components on the card which were extremely close to shorting on the AMPLE device.

 

 

I chose to mount mine with 0.8 mm copper plate. I kept the plane-to-plane distance as short as possible. Furthermore, I always prefer to make my ground connections on the front of the card after where the main connection is.

In the picture below you can see both ground connections come after the memory plan connection. In my testing this provides the best realized MHz whether it be core or memory external VRM replacement.

 

 

Test Setup

The overall goal is to compare stock PCB memory overclocking with AMPLE power memory overclocking. To make the test consistent, I will use the same load voltage for both test conditions. The test methodology is to overclock memory and record the passable frequency in Fire Strike GT1. I will start at 2280 MHz, increase +10 MHz until it becomes unstable

  • PowerColor RX580 8GB Golden Sample
  • Z490 test platform
  • AMPLE VRM on memory rail
  • Memory IC: Micron D9VVR
  • 1625 MHz strap timings copied to 2000 MHz strap (Most efficient timings possible without diminishing returns on frequency)

In order to get a realistic look at the voltage response of the device, I have placed voltage test points (TP1-3) at various distances away from the main inductor. During the load tests, I will also be conducting thermal tests of the mosfet heatsink. Ambient temperature for all tests around 24c

 

The voltage read points are as follows:

  • TP1 = AMPLE power voltage at C10 cap
  • TP2 = GPU plane voltage at solder connection
  • TP3 = Memory IC voltage at MLCC cap on back of card, at least 100mm distance from AMPLE Vout solder connection

Test Results

 

 

Voltage droop is the enemy of external VRM mods. It’s important to know exactly where the voltage droop occurs because it can narrow down the cause. The voltage test point results indicate that the droop is not caused by the solder connection. The voltage droop is present at the C10 capacitor so therefore it’s coming directly from the AMPLE VRM. This makes me happy because the solder connection is relatively perfect, but it’s mildly concerning to see the AMPLE being stressed under load.

 

Regardless of any droop, the card was still able to pass FS GT1 test at the highest possible memory frequency. There is effectively no difference between the stock VRM and the AMPLE VRM for this test application.

 

The temperature reached a peak at the end of GT2 and was still climbing. With the Fire Strike test, GT3 is CPU based so it had a cooldown period. The max temp of around 50c seems reasonable but further testing may be needed. Sustained loads of 1hr might show a different result.

 

SW1 Test results proved inconclusive. Disregarding experimental error, there was effectively no difference in the realized MHz or voltage response.

 

Conclusion

Overall I am extremely pleased with this little device. It performed exceptionally well and the end result is that I was able to achieve the same overclocking performance as the stock PCB. The AMPLE single-phase power card has been validated for benchmarking purposes.

 

In terms of the switch options, my expectation was that CCM mode with 750 KHz would be the optimal configuration. The switch test results showed that the various combinations didn't have any noticeable effect on realized Mhz or voltage response. The 10 mV voltage droop is a mild concern because it’s coming directly from the AMPLE, however, it did not affect the overall overclocking result.

 

With a price tag of just $20,, it’s an absolute must-have tool for extreme overclockers. My RX580 is the perfect use case. The card was effectively dead and useless, but the mighty little AMPLE device brought it back to life and it still holds gold in TIme Spy. Even if the price was tripled, I would still recommend it because of its potential value.

 

This was just my first test, stay tuned for more tests to come.

Link to post
Share on other sites

Very nice write-up ! I had a chance to see Elmor's I2C in action before, and this 'ElmorLabs AMPLE' is a nice addition, for example for GPUs per your post...

 

...which reminds me: @486 ...keep this in mind re. 780 Ti Classy with 'those scars'...

Link to post
Share on other sites

Very nice presentation! If my work bench skills were bit less sloppy I'd be seriously thinking of how many dead cards on ebay might be saved with this.:) And the wife would be asking "Why are you getting another card for a computer U don't even use?" LOL

 

Seriously,a very nice write up that made things easy to understand and explained what I was looking @ very well.:thumbs_thumbup:

Link to post
Share on other sites
Nice, I didn't think about it in the way that you could also use this to essentially replace a busted VRM, even if you are not interested in extreme overclocking.

 

That's exactly right! I have also seen cards with damaged PLL, 5V, and 3.3V rails...all of those broken voltage regulators could be replaced with this device. It has lots of applications outside of extreme overclocking!

 

Very nice presentation! If my work bench skills were bit less sloppy I'd be seriously thinking of how many dead cards on ebay might be saved with this.:) And the wife would be asking "Why are you getting another card for a computer U don't even use?" LOL

 

Seriously,a very nice write up that made things easy to understand and explained what I was looking @ very well.:thumbs_thumbup:

 

Thank you! And yes...my wife would say the exact same thing...with a strong eye-roll tossed in for good measure :p

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

This Website may place and access certain Cookies on your computer. ExtremeHW uses Cookies to improve your experience of using the Website and to improve our range of products and services. ExtremeHW has carefully chosen these Cookies and has taken steps to ensure that your privacy is protected and respected at all times. All Cookies used by this Website are used in accordance with current UK and EU Cookie Law. For more information please see our Privacy Policy